一种传感器网格自协同作战模型*

传统的协同技术不能满足传感器网格复杂的协同应用在动态性、实时性以及分布决策的强协同等方面的需求。为此,建立了一种自协同技术,给出了自协同作战虚拟组织(ACBVO)的参量化描述,提出了传感器网格自协同作战模型(SGACBM),描述了协同成员的信息结构和功能结构。使用SGACBM,ACBVO能在执行任务过程中,不断监测协同工作的质量,并根据协同质量动态切换协同机制。SGACBM能改善传感器网格的协同质量,加速作战进程,实现传感器网格自协同作战。     

三关节机器人的神经网络补偿自适应控制器设计

三关节机器人广泛用于工业生产、轮式或履带式排爆机器人,为了补偿由于机器人结构参数、作业环境干扰等不确定性因素造成的机器人动力学模型的不确定性,将机器人动力学模型分解为名义模型和误差模型两部分,其误差模型采用RBF神经网络进行补偿,得到其估计信息,神经网络的输出权值根据Lyapunov稳定性理论采用自适应算法进行调整。所设计的神经网络补偿自适应控制器解决了不确定性机器人动力学系统控制器设计的不确定性问题,同时,通过定义Lyapunov函数,证明了控制器能渐近、稳定地跟踪期望轨迹。机器人的3个关节在控制器的作用下,约在5 s时达到期望轨迹,神经网络约在5 s时逼近机器人动力学模型的误差模型,实验结果表明了机器人关节对期望轨迹具有良好的轨迹跟踪性能。     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

共址调频和调幅系统干扰机理及干扰抑制需求分析

以调幅和调频电台为研究对象,对共平台接收电台前端低噪声放大器的非线性进行精确建模,分别对调幅电台和调频电台的干扰抑制需求进行解析,并通过数值仿真对解析模型进行验证。结果表明:所提解析模型较现有模型更为准确;当有用信号功率、噪声功率和干扰功率相同时,调幅通信系统的干扰抑制需求高于调频通信系统。     

考虑禁飞区的高超声速飞行器再入跟踪控制

为确立高超声速飞行器再入精确模型,参考NASA的研究数据对动力学方程中的气动参数进行拟合。基于飞行器结构的相关性质及战略应用背景,加入热流密度、动压、过载和禁飞区等参考约束的限制,融合成强非线性、复杂耦合的最优控制问题。采用改进自适应伪谱法求解模型所构建的微分方程组,通过设置自适应网格细化与配点,使单位时间内状态变量和控制变量波动过大的时间区间被进一步细划,并利用SNOPT求解器解算出符合条件的最优轨迹。设计闭环控制器,实现对最优轨迹的姿态变化的跟踪,测试系统的性能并进行评估。仿真结果表明:整个再入过程中,飞行器速度下降过程偏于平稳,再入轨迹可以满足约束条件,在避开禁飞区的同时取得最大横向航程;三通道角速度收敛可控,对姿态的跟踪较理想,控制器基本可以实现精确调姿。     

基于输入特性分析的光电跟踪内模控制设计

内模控制是一种基于对象教学模型进行控制器设计的新型控制策略,其设计思路是将对象模型与实际对象相并联,控制器逼近模型的动态逆.根据内模控制原理及光电跟踪系统参考输入及扰动输入特性,设计了一种新型位置控制器.并分析了IMC跟踪控制器的零稳念偏差及抗干扰性能.从仿真结果看,与常规PID控制相比,内模控制器参数调整简单、跟踪性能良好.特别是在针对目标突然机动的情况下.IMC控制器具有良好的稳态误差重构能力,即能迅速收敛到稳态误差.根据仿真结果数据统计,系统跟踪误差的均方根可减小到0.5 tarad,表明该控制器能够提高系统的跟踪精度,为高性能光电跟踪系统提供了一种新的控制策略.     

A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。